Rusting Steel and Spalling Concrete

Concrete spalls when the steel inside it rusts and expands. Prevention means dense, low-permeability concrete with enough cover, plus a corrosion inhibitor or protective coating where chlorides or carbonation are a risk.

Why It Happens

  • Chlorides from sea air, groundwater or de-icing salts
  • Carbonation lowering the protective alkalinity of concrete
  • Too little concrete cover over the steel
  • Cracks letting water and oxygen reach the reinforcement

How to Fix It

  1. 01

    Use a superplasticiser to make dense concrete with a low water-cement ratio

  2. 02

    Add a corrosion inhibitor to the mix in coastal and industrial exposure

  3. 03

    Repair damaged areas with a repair mortar after cleaning the steel

  4. 04

    Coat exposed surfaces to slow the ingress of chlorides and CO₂

Dealing with this now?

Call us and describe the site. We will recommend the products and quantities.

Products We Recommend

Product rangeWhat to use
Specialty AdmixturesCorrosion inhibitors — Sika® CNI and FerroGard®-901
Concrete AdmixturesSika® ViscoCrete® superplasticisers
Concrete Repair and GroutingSika® MonoTop® repair mortars
Industrial Floors and Protective CoatingsSikagard® protective coatings

Common Questions

How do I know if the steel is rusting?

Common signs are rust stains, cracks along the line of the bars and hollow-sounding or loose concrete.

Can spalled concrete be repaired?

Yes. Loose concrete is removed, the steel is cleaned and treated, and the section is rebuilt with a repair mortar.

Does a coating stop corrosion?

A protective coating slows the entry of chlorides and CO₂. It works best together with sound, dense concrete.

Talk to Us Before You Buy

A short call can save a costly wrong purchase. Tell us the job and we will point you to the product that fits, then put the price in writing.

Call nowGet a quote